-
Hello!
Either you have not registered on this site yet, or you are registered but have not logged in. In either case, you will not be able to use the full functionality of this site until you have registered, and then logged in after your registration has been approved.
Registration is FREE, so please register so you can participate instead of remaining a lurker....
Please be certain that the location field is correctly filled out when you register. All registrations that appear to be bogus will be rejected. Which means that if your location field does NOT match the actual location of your registration IP address, then your registration will be rejected.
Sorry about the strictness of this requirement, but it is necessary to block spammers and scammers at the door as much as possible.
How 2 Build and what do i need 4 a Racksystem?
- Thread starter lajes
- Start date
Blue Apple Herps
aka Matthew, PhD
Here's my latest one: http://www.cornsnakes.com/forums/showthread.php?t=47373
I got 16x36" melamine shelves and 16x48" melamine shelves for the sides. Attatched them the appropriate distance apart for the tubs (sterilite 41 qt tubs). Routed out a slot in each shelve for heat cable to run though. I also added a 1x2 extension along the back of the shelves to extend their length as 16" was not deep enough for the tubs.
If you're going to use a smaller tub such as a 32qt one the you would have to maket he shelves not as wide. But other than that the process would be the same.
This is a very very easy rack to make; mainly because made for 41 qt tubs there is no cutting down pieces except for the 1x2 for the back, but these cuts can be done by home depot/lowes. Other than that all you need really is a ruler and a drill.
I got 16x36" melamine shelves and 16x48" melamine shelves for the sides. Attatched them the appropriate distance apart for the tubs (sterilite 41 qt tubs). Routed out a slot in each shelve for heat cable to run though. I also added a 1x2 extension along the back of the shelves to extend their length as 16" was not deep enough for the tubs.
If you're going to use a smaller tub such as a 32qt one the you would have to maket he shelves not as wide. But other than that the process would be the same.
This is a very very easy rack to make; mainly because made for 41 qt tubs there is no cutting down pieces except for the 1x2 for the back, but these cuts can be done by home depot/lowes. Other than that all you need really is a ruler and a drill.
Gib_one
New member
Why dont you just use the search function? There are many threads that show how to build a rack easily.
Sorry für Offtopic: Übrigens ist nicht jeder Trend der von den Amis rüberschwappt nachahmenswert, höchstens zur Aufzucht. Aber wer sich "wiesandammeer" morphen(ghost, caramel) als USNZ statt als DNZ holt, was kann man da erwarten... | Sorry for Offtopic^^
Sorry für Offtopic: Übrigens ist nicht jeder Trend der von den Amis rüberschwappt nachahmenswert, höchstens zur Aufzucht. Aber wer sich "wiesandammeer" morphen(ghost, caramel) als USNZ statt als DNZ holt, was kann man da erwarten... | Sorry for Offtopic^^