• Hello!

    Either you have not registered on this site yet, or you are registered but have not logged in. In either case, you will not be able to use the full functionality of this site until you have registered, and then logged in after your registration has been approved.

    Registration is FREE, so please register so you can participate instead of remaining a lurker....

    Please be certain that the location field is correctly filled out when you register. All registrations that appear to be bogus will be rejected. Which means that if your location field does NOT match the actual location of your registration IP address, then your registration will be rejected.

    Sorry about the strictness of this requirement, but it is necessary to block spammers and scammers at the door as much as possible.

ESU Reptile Digital Thermometer?

I use it... Just change the battery on one of them. I have no problem with it.
And...I hot glue down the probe above the uth too. Still works!!
 
Ok, so I'm going to get me two of those. But another thing: Where do I put the probes? Lenny said right above the UTH, and I guess I would put the other probe on the cold side under the aspen touching the glass?
 
Ok, so I'm going to get me two of those. But another thing: Where do I put the probes? Lenny said right above the UTH, and I guess I would put the other probe on the cold side under the aspen touching the glass?


Yeah, the cold side of mine just "floats" around.
 
Back
Top