CornSnakes.com Forums  
  Want an edit button and other perks? Become a contributing member! Click here.

Go Back   CornSnakes.com Forums > The CornSnake Forums > DIY Projects
Register FAQ Members List Calendar Mark Forums Read

Notices

DIY Projects Use this forum to post threads related to home made projects for your corns... Vivariums, hides, decorations, accessories, you name it. Anything to save some bucks or give your personalized touch.

To DIY or not
Reply
 
Thread Tools Display Modes
Old 05-18-2019, 02:12 AM   #1
Maron
To DIY or not

Hi everyone.

I am looking to get my first cornsnake and have been researching about enclosures a lot...and am confused as to what I need.

I canít decide what is best: a tub, a brand terrarium, a converted aquarium, or a self built wood enclosure.

Has anyone ever converted a TV stand into an enclosure?

For building one myself, I live in Japan so options are limited. At my local diy store I can pick up some wood that translates to Paulownia, pine, cypress or mdf type sheets.

Are these all ok for corn snakes? I know cedar is not an option and pine is frowned upon.

If I lined the inside of the enclosure with acrylic sheeting and sealed it with silicone would that negate the effects of the pine?

I am also not sure how much ventilation to provide. We get very hot and humid summers here (35 degrees C or more). Is there ever a necessity to provide cooling to the enclosure? Or can a corn snake thrive in a hotter environment?
 
Old 05-18-2019, 08:45 AM   #2
Twolunger
A converted aquarium is the easiest enclosure provided there is a secure locking lid. The advantage to an aquarium is the glass bottom. You can affix a heating pad under the tank. If you build one and have a wooden floor supplying belly heat becomes a problem. You are going to run into a problem if the temps reach 35C with humidity. Cooling will definitely be needed. When the temps hit 95F in my area you never see a corn snake during the day, they hide in a cool spot and become active only at night.

I have built several enclosures over the years. We are lucky here because we can buy 4x8 sheets of thin wood products that have a coating similar to melamine. If you can find thin plywood there and cover it with melamine or formica that would work.
 
Old 05-18-2019, 09:06 AM   #3
Maron
Thanks for the reply.

I just went to my in-laws and found this old display case. Do you think I could fix this up into an enclosure?

It is pretty sturdy and I can add a locking mechanism to the sliding glass doors. If I replace the bottom of the case with 5mm acrylic will that act as a decent enough conduit for the heat from a heat pad?

The space inside the case is 85cm wide, 26cm deep and 45 cm high. Is this enough? Would it be better to it lying down to increase the floor space and reduce the vertical space?

I would also add a couple of vents at each end of the case for ventilation.

Do you think this could work?
 
Old 05-18-2019, 09:59 AM   #4
Twolunger
It will work fine, but I don't think the acrylic would be a good conductor of heat. If I was using the case I would buy a glass piece to replace the bottom. Just leave enough on the edges so you can lay the glass on it. You can secure the glass to the edge with silicone sealer.

Corns do like to climb so the height is good.
 
Old 05-20-2019, 07:04 AM   #5
Maron
I have made a little progress.

Glass sheets at the bottom on the left and right (the white patches) with black 3mm acrylic covering the rest of the inside on the case. Everything is sealed with silicone.

I have added a vent on the left, which will be the cool end. Is this enough ventilation?

Next step is the clean up the glass and add a lock, and then give the whole inside a wash.

What do you think so far?
 
Old 05-20-2019, 10:24 PM   #6
Twolunger
Looking good so far. Most people would suggest vents on both sides but a lot would depend upon the ambient heat of the enclosure, especially during the winter months. But you could always close off part of the vents if necessary. Those appear to be large holes in the vent, but I can't tell if there's a screen cover too. I'm assuming you are going to buy an adult or sub-adult?
 
Old 05-22-2019, 01:15 AM   #7
mrgrtt123
Wow that enclosure looks amazing, it seems like it is spacious for your companion.
 
Old 05-26-2019, 11:34 AM   #8
Maron
It has been a busy week with lots of deliveries.

I now have the case set up with a thermostat and heating mat.

I also added another vent at the top. Both vents have 6mm spaces. Is that something corn snakes will get through as hatchlings? If so I will need to escape proof them or aim to get a bigger snake.

I have put in some decor and substrate with a water bowl so I can get my temperature and humidity settings all worked out before the Kyushu reptile festa this coming saturday.

When I am taking the temp for the hot end, should I be getting my readings from the top of the substrate or from the glass underneath? When the substrate is showing 86 the glass can be as high as 100. I am getting humidity levels of around 70 with the water bowl in there.

Next is to 3d print a few hides I have designed and then all that is left is to head to the reptile show and pick up a snake.
 
Old 05-26-2019, 11:48 PM   #9
Twolunger
If you haven't glued the vents to the wood I'd cut a piece of window screen to cover the vent holes and then reattach the vents. 6mm is about 1/4 inch and I've had hatchlings squeeze through holes that big. You will probably get varied opinions regarding the heat on the hot end. I never have heat hotter than 82 on top of the substrate and 86 on the bottom of the containers I use. I'd be worried when the temp is 100. Corns do burrow.
 

Join now to reply to this thread or open new ones for your questions & comments! Cornsnakes.com is the largest online community dedicated to cornsnakes . Registration is open to everyone and FREE. Click Here to Register!

Google
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 06:10 AM.



Ebates Coupons and Cash Back

Fauna Top Sites
 

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Page generated in 0.06583500 seconds with 12 queries
Copyright Rich Zuchowski/SerpenCo