• Hello!

    Either you have not registered on this site yet, or you are registered but have not logged in. In either case, you will not be able to use the full functionality of this site until you have registered, and then logged in after your registration has been approved.

    Registration is FREE, so please register so you can participate instead of remaining a lurker....

    Please be certain that the location field is correctly filled out when you register. All registrations that appear to be bogus will be rejected. Which means that if your location field does NOT match the actual location of your registration IP address, then your registration will be rejected.

    Sorry about the strictness of this requirement, but it is necessary to block spammers and scammers at the door as much as possible.

never moves from cooler side?

LittleL

New member
After being advised to move my heat mat to underneath the tank (i was originally advised by my pet shop to place it on the side of the tank!).. i have now moved the heat mat to 1/3 under the tank and i've brought a mat-stat thermostat and digital thermometer.. i have the warmer side to a temperture approx around 82-87f and the cooler side to around 72-75f...

I've noticed that my corn snake curls up and hides under the aspen and his waterbowl on the cooler side of the tank all the time and doesn't moved for a whole day!?!

Is it normal for him to stay on the cooler side of the tank and not to move too and from the wamer side to the cooler side to regulate his body temperture??

Is the warmer side too hot do you think? any comments?

Im just wondering if it's normal for him to curl up in one spot (on the cooler side of the tank) and for him not to move from there for a day or two?!

please advise

Laura
 
Normal! The snake will go wherever it wants- as long as there are hides in both places.

Do you mean the UTH covers 1/3 of the bottom of the viv, or 1/3 of the UTH is under the viv? Because it should cover 1/3 of the bottom of the viv, with no UTH sticking out.

Nanci
 
the UTH cover 1/3 of the bottom of the tank and the only bit that sticks out slightly is the clear plastic around the edge of the heat mat... im assuming thats acceptable?

Does my temps seem ok for the cooler and warmer sides??

There is a hiding place in both the cooler and warmer end.

Laura
 
Back
Top