-
Hello!
Either you have not registered on this site yet, or you are registered but have not logged in. In either case, you will not be able to use the full functionality of this site until you have registered, and then logged in after your registration has been approved.
Registration is FREE, so please register so you can participate instead of remaining a lurker....
Please be certain that the location field is correctly filled out when you register. All registrations that appear to be bogus will be rejected. Which means that if your location field does NOT match the actual location of your registration IP address, then your registration will be rejected.
Sorry about the strictness of this requirement, but it is necessary to block spammers and scammers at the door as much as possible.
My first year breeding
- Thread starter inu009
- Start date
hypnoctopus
Olivia Barron
Cool! Looking good! Have you seen movement yet?
inu009
New member
I've been wondering, I've been doing some searching on the forum and cant seem to find the answer/consensus. The Cornsnake books I haven't don't seem to mention it directly, either. I know heat spikes can cause kinking/deformities or even widely fluctuating temps as well. But for me, I keep a relatively stable 79 degrees plus or minus .3 degrees, except for the twice weekly egg checks where it will drop down to about 77.5 before stabilizing back to 79 (within a 15 minute period or so). Is that bad enough to harm to the growing babies? Probably not, but I'm getting anxious thinking about it lol.
hypnoctopus
Olivia Barron
No, that isn't an issue. Heat spikes will be temps above 90 degrees.
Caryl
BrightHope
I agree, no need at all to worry about your temps. Your set temp and variance of 3 degrees are fine. Olivia is spot on that most don't consider temps below 90°F to be a "spike." I'll add that even if temps cross that threshold, they need to stay up there for a while to cause problems. The term "spike" is a bit of a misnomer because it makes us think of a rapid increase and decrease.
Eggs are mostly water. Water has a very high heat capacity, which means that it takes a lot of energy to change the temperature of water. If you were to take a container of room temperature water the size of your clutch and subject it to air temperature of 90°F or even 100°F for an hour, everything would be fine. When you consider that your eggs are nestled in an incubation medium which likely contains more water, further insulated by the air within the incubation container, you can understand that a short-term rise in temperature is unlikely to be problematic. (The actual time required for the temperature rise will vary depending upon each setup.)
TLDR: Temps must be above 90°F for a sustained period to cause problems. It can happen but is thankfully rare.
Sent from my SM-A716U1 using Tapatalk
Eggs are mostly water. Water has a very high heat capacity, which means that it takes a lot of energy to change the temperature of water. If you were to take a container of room temperature water the size of your clutch and subject it to air temperature of 90°F or even 100°F for an hour, everything would be fine. When you consider that your eggs are nestled in an incubation medium which likely contains more water, further insulated by the air within the incubation container, you can understand that a short-term rise in temperature is unlikely to be problematic. (The actual time required for the temperature rise will vary depending upon each setup.)
TLDR: Temps must be above 90°F for a sustained period to cause problems. It can happen but is thankfully rare.
Sent from my SM-A716U1 using Tapatalk
inu009
New member
Thanks guys! That really calms my nerves. It makes sense, about since the eggs are mostly water, it takes more to change the temp, so even if the sensor says there was a 3 degrees loss of temp, the eggs themselves probably saw even less of a change.
I feel like I'm just making things up to worry about since things are going well *so far* lol.
I feel like I'm just making things up to worry about since things are going well *so far* lol.
Caryl
BrightHope
That's absolutely true.
I do understand your impulse to worry about something when things are going well. I'm kinda in the same worry-wagon! Lol
Sent from my SM-A716U1 using Tapatalk
hypnoctopus
Olivia Barron
My very first clutch actually did even have a few hours of being quite hot accidentally. I felt terrible about it, but all the eggs ended up hatching and none of the babies had any kinks or issues (and they were all perfect eaters too!) Not that I would recommend letting a heat spike happen, but even if it does, it's not a guaranteed death sentence for your clutch.
inu009
New member
Bean refused a meal and that could mean two things. Either, she's double clutching, which I hope not, I've been feeding her kind of conservatively in order to avoid a double clutch. She's at 472 grams (at a little over 4 and a half feet), so technically I guess she could, but I don't want her to. Second option is she's going on her yearly hunger strike. Every year she goes off food in May/June for a few weeks, but I figured with her having a clutch, she wouldn't...
Also, kinda crazy to think as of this coming Monday, I'll be two weeks away from 60 days, which is the start my assumed due date range (when I'll start checking everyday).
Also, kinda crazy to think as of this coming Monday, I'll be two weeks away from 60 days, which is the start my assumed due date range (when I'll start checking everyday).
Caryl
BrightHope
Sounds suspicious, lol. After that big first clutch, I won't be surprised if she lays again. Seems like the fertile ones are really fertile! And it's usually about when the first clutch is due to hatch, so she's timely. I don't want double clutches either, but Tulip nearly always does it anyhow. No matter how she's fed.
Sent from my SM-A716U1 using Tapatalk
Sent from my SM-A716U1 using Tapatalk
inu009
New member
Man :face_palm_02:
If she starts a shed within the next two weeks I know to get a laybox ready. I don't even know if I'd even incubate a second clutch, I'm moving in august and I don't want to have the stress of moving eggs and whatever babies I'd have left. Plus right now my incubator is only set up for one clutch right now, but then again it would be take minimum effort to re-arrange the set up. But discarding them seems very wasteful (and disrespectful to her hard work lol)
I guess I'll cross that road when(if) I get there.
If she starts a shed within the next two weeks I know to get a laybox ready. I don't even know if I'd even incubate a second clutch, I'm moving in august and I don't want to have the stress of moving eggs and whatever babies I'd have left. Plus right now my incubator is only set up for one clutch right now, but then again it would be take minimum effort to re-arrange the set up. But discarding them seems very wasteful (and disrespectful to her hard work lol)
I guess I'll cross that road when(if) I get there.
Caryl
BrightHope
Definitely sounds suspicious! I know what you mean about the stress of dealing with moving and eggs and babies... We had been planning to move in the late spring, before anybody would have been due to lay. That fell apart, and I've just pretty much planted my feet for the moment. We have the luxury of being able to choose our timing, for which I'm grateful. I can't think about moving hundreds of miles with incubating eggs. Not gonna happen. Now, as long as hurricane evacuation doesn't happen, we will be thrilled.
Sent from my SM-A716U1 using Tapatalk
Sent from my SM-A716U1 using Tapatalk
DinosaurMorph
New member
I just read all 12 pages of this thread, it’s a pleasant and informative read. Thank you to all who contributed. I hope that when it is finally finished it will be archived or stickied or whatever the term is so that future 1st time breeders can look back at it and relate their experiences.
I have a question re the double-clutching, actually two questions on that same topic. The first is to the OP: Why after all of your effort and years of planning do you not want two clutches from this process? It seems to me it’s like a 50% off sale; the brumation the pairing the locking the wondering… that’s all done and now because the female retained some of the male’s initial sperm so early in the season you get a double-scoop for your efforts. I’m not implying that you are in this for the money but breeding, even just keeping snakes (or any kind of pet for that matter) does in fact cost money and now here’s your chance to recoup some of the expense for the incubator, hydrometer, temp gun, enclosures, hides, moss, feeders, the list goes on and on.
The least expensive morph hatchlings on MorphMarket, Fauna, expos, Craigslist, sell for ~$50 each. Do the math. Certainly not worth quitting your day job but having a hobby that pays for itself or even earns a few tanks of gas never hurt anybody. And you’d get to share the fruit of labor with other hobbyists, some of which, like you, might be eager to breed for the 1st time.
My 2nd question re 2x-clutching goes to the experienced breeders. Correct me if I’m wrong but 2x-clutching is a (mostly) unnatural process. I mean it has only been happening for the past ~50yrs that humans have been cultivating Corns and providing them with ideal (unnatural) conditions. In our houses, reptile stores, breeding facilities, there’s a steady and reliable supply of food for the snakes. There’s no famine, drought, flood, hurricanes, heat waves, cold snaps, predators, invasive species, Corns propagated by humans have no competition for survival there’s no “only the fittest survive” going on.
Pairing/Locks in captivity occur when many Corns (especially north of Florida) would normally still be in brumation. This jump, this head-start early in the reproductive timeline is the main contributing factor to 2x-clutching. Again, correct me if I’m wrong; this is my understanding from looking at the timeline in Don Soderberg’s book and knowing what goes on naturally/climatically in southeastern US which is the natural range of Corns, i.e. the origin of every Corn morph ever produced no matter how aberrant its skin color/pattern/scales may appear today.
But, what if our Corns were brought out of brumation more naturally. The term “summer room temperature method” from Kathy Love’s book comes to mind. What if Corns were not paired in March but were instead paired in April, May, or June. After all, the warmest, most humid, most stable temperatures (most conducive to incubation) in the US are during July/August (the Summer Doldrums). What is the latest that Corns could be paired in time to yield a single-clutch?
BTW OP if you are reading, and if you are gonna breed again next year, and if you really want only 1 clutch (or to anybody who wants only 1 clutch), the surest way to prevent a double is to begin the process when it is beginning in the woods, fields, swamps of southeastern US. (Or am I wrong?)
I have a question re the double-clutching, actually two questions on that same topic. The first is to the OP: Why after all of your effort and years of planning do you not want two clutches from this process? It seems to me it’s like a 50% off sale; the brumation the pairing the locking the wondering… that’s all done and now because the female retained some of the male’s initial sperm so early in the season you get a double-scoop for your efforts. I’m not implying that you are in this for the money but breeding, even just keeping snakes (or any kind of pet for that matter) does in fact cost money and now here’s your chance to recoup some of the expense for the incubator, hydrometer, temp gun, enclosures, hides, moss, feeders, the list goes on and on.
The least expensive morph hatchlings on MorphMarket, Fauna, expos, Craigslist, sell for ~$50 each. Do the math. Certainly not worth quitting your day job but having a hobby that pays for itself or even earns a few tanks of gas never hurt anybody. And you’d get to share the fruit of labor with other hobbyists, some of which, like you, might be eager to breed for the 1st time.
My 2nd question re 2x-clutching goes to the experienced breeders. Correct me if I’m wrong but 2x-clutching is a (mostly) unnatural process. I mean it has only been happening for the past ~50yrs that humans have been cultivating Corns and providing them with ideal (unnatural) conditions. In our houses, reptile stores, breeding facilities, there’s a steady and reliable supply of food for the snakes. There’s no famine, drought, flood, hurricanes, heat waves, cold snaps, predators, invasive species, Corns propagated by humans have no competition for survival there’s no “only the fittest survive” going on.
Pairing/Locks in captivity occur when many Corns (especially north of Florida) would normally still be in brumation. This jump, this head-start early in the reproductive timeline is the main contributing factor to 2x-clutching. Again, correct me if I’m wrong; this is my understanding from looking at the timeline in Don Soderberg’s book and knowing what goes on naturally/climatically in southeastern US which is the natural range of Corns, i.e. the origin of every Corn morph ever produced no matter how aberrant its skin color/pattern/scales may appear today.
But, what if our Corns were brought out of brumation more naturally. The term “summer room temperature method” from Kathy Love’s book comes to mind. What if Corns were not paired in March but were instead paired in April, May, or June. After all, the warmest, most humid, most stable temperatures (most conducive to incubation) in the US are during July/August (the Summer Doldrums). What is the latest that Corns could be paired in time to yield a single-clutch?
BTW OP if you are reading, and if you are gonna breed again next year, and if you really want only 1 clutch (or to anybody who wants only 1 clutch), the surest way to prevent a double is to begin the process when it is beginning in the woods, fields, swamps of southeastern US. (Or am I wrong?)
inu009
New member
I just read all 12 pages of this thread, it’s a pleasant and informative read. Thank you to all who contributed. I hope that when it is finally finished it will be archived or stickied or whatever the term is so that future 1st time breeders can look back at it and relate their experiences.
I have a question re the double-clutching, actually two questions on that same topic. The first is to the OP: Why after all of your effort and years of planning do you not want two clutches from this process? It seems to me it’s like a 50% off sale; the brumation the pairing the locking the wondering… that’s all done and now because the female retained some of the male’s initial sperm so early in the season you get a double-scoop for your efforts. I’m not implying that you are in this for the money but breeding, even just keeping snakes (or any kind of pet for that matter) does in fact cost money and now here’s your chance to recoup some of the expense for the incubator, hydrometer, temp gun, enclosures, hides, moss, feeders, the list goes on and on.
The least expensive morph hatchlings on MorphMarket, Fauna, expos, Craigslist, sell for ~$50 each. Do the math. Certainly not worth quitting your day job but having a hobby that pays for itself or even earns a few tanks of gas never hurt anybody. And you’d get to share the fruit of labor with other hobbyists, some of which, like you, might be eager to breed for the 1st time.
My 2nd question re 2x-clutching goes to the experienced breeders. Correct me if I’m wrong but 2x-clutching is a (mostly) unnatural process. I mean it has only been happening for the past ~50yrs that humans have been cultivating Corns and providing them with ideal (unnatural) conditions. In our houses, reptile stores, breeding facilities, there’s a steady and reliable supply of food for the snakes. There’s no famine, drought, flood, hurricanes, heat waves, cold snaps, predators, invasive species, Corns propagated by humans have no competition for survival there’s no “only the fittest survive” going on.
Pairing/Locks in captivity occur when many Corns (especially north of Florida) would normally still be in brumation. This jump, this head-start early in the reproductive timeline is the main contributing factor to 2x-clutching. Again, correct me if I’m wrong; this is my understanding from looking at the timeline in Don Soderberg’s book and knowing what goes on naturally/climatically in southeastern US which is the natural range of Corns, i.e. the origin of every Corn morph ever produced no matter how aberrant its skin color/pattern/scales may appear today.
But, what if our Corns were brought out of brumation more naturally. The term “summer room temperature method” from Kathy Love’s book comes to mind. What if Corns were not paired in March but were instead paired in April, May, or June. After all, the warmest, most humid, most stable temperatures (most conducive to incubation) in the US are during July/August (the Summer Doldrums). What is the latest that Corns could be paired in time to yield a single-clutch?
BTW OP if you are reading, and if you are gonna breed again next year, and if you really want only 1 clutch (or to anybody who wants only 1 clutch), the surest way to prevent a double is to begin the process when it is beginning in the woods, fields, swamps of southeastern US. (Or am I wrong?)
I didn't/don't want her to double clutch I really don't want any extra stress on the female. The first go around went pretty perfectly, I don't want to temp fate. I consider myself a generally unlucky person so I don't want Murphy knocking on my door lmao.
I didn't brumate, because it doesn't get cold enough here for it. (And tbh, I'd miss the snakes too much if I did) I just light cycled them, and started pairing in January. It wasn't perfect because the female either never had an ovulation shed, or the ovulation shed happened in December, but luckily it all worked out in the end.
I started pairing so early this year due to impatience to be honest, I really wanted to get everything started. I was too antsy, I couldn't wait another day to start pairing lol. Regardless still had to wait like 2 months before anything happened, away. If I breed next year, I'm not sure when I'd start pairing. Since I don't brumate, I cant really predict when the females would ovulate. Bean (the mother of this clutch) is definitely taking next year off, and my other female, Sprout would be ready to go, but I'm not sure If I'd be ready to go (again).
In terms of recouping cost with the babies, I haven't been thinking about the monetary aspect. I keep having to remind myself, oh yeah the babies do technically, kinda, equate to some monetary value. Any money spent on my snakes (so the incubator, the hatchling rack I ordered, etc) is really just me spending my money as a 28 year old with no (human) children lol. I don't really consider it an investment or anything.
Caryl
BrightHope
My phone's going wonky (this is the NEW phone too, Grrrr) so I'm delayed on replies. @Dinosaur Morph posed some good questions. Here's my take on some of the double clutch related questions, for what it's worth.
I personally have been excited about double clutches in the past, based upon the reasons already brought up. This year is different for me personally, and it's just me. I've currently got 81 eggs incubating, and I'm thrilled. Every clutch was very much hoped for. That's nothing compared to many, but I know that with my physical limitations, it's going to be a lot for me. I don't know that I can handle a whole lot more. Maybe some first round hatchlings will have been sold before any later arrivals hatch, or maybe I'll lose a lot of eggs through incubation. I don't expect to, but tragedies happen and aren't always in our control.
That said, I'm still not pulling for doubles from my two young first time mothers, nor from Tulip who is the oldest of my dams. They're recovering well, and honestly I expect Tulip to double bc she always does, and has even done it when she's not been bred. That brings me to the next point.
Sent from my SM-A716U1 using Tapatalk
I personally have been excited about double clutches in the past, based upon the reasons already brought up. This year is different for me personally, and it's just me. I've currently got 81 eggs incubating, and I'm thrilled. Every clutch was very much hoped for. That's nothing compared to many, but I know that with my physical limitations, it's going to be a lot for me. I don't know that I can handle a whole lot more. Maybe some first round hatchlings will have been sold before any later arrivals hatch, or maybe I'll lose a lot of eggs through incubation. I don't expect to, but tragedies happen and aren't always in our control.
That said, I'm still not pulling for doubles from my two young first time mothers, nor from Tulip who is the oldest of my dams. They're recovering well, and honestly I expect Tulip to double bc she always does, and has even done it when she's not been bred. That brings me to the next point.
Sent from my SM-A716U1 using Tapatalk