• Hello!

    Either you have not registered on this site yet, or you are registered but have not logged in. In either case, you will not be able to use the full functionality of this site until you have registered, and then logged in after your registration has been approved.

    Registration is FREE, so please register so you can participate instead of remaining a lurker....

    Please be certain that the location field is correctly filled out when you register. All registrations that appear to be bogus will be rejected. Which means that if your location field does NOT match the actual location of your registration IP address, then your registration will be rejected.

    Sorry about the strictness of this requirement, but it is necessary to block spammers and scammers at the door as much as possible.

Zilla critter cage

ructo

ructo

New member
So I have a critter cage, but how should I get the thermometer in? Should I drill the mesh slightly, go from underneath, or what? Ructo's last tank just had boards on top to keep him in, but this one has a mesh lid. Sorry if this a stupid question.
 
Are those the glass ones with the sliding screen top? Some of the ones with the sliding screen tops have little notches designed for the wires, and others have little tabs in the plastic that are designed to be broken off if you want to make a space for wires. I'm not sure about zilla brand in particular.
 
How odd. Mine has some notches at the back that you can pop out that are used for cords.
 
I see little triangle like tabs in the back. I thought the lid would cover them, but it doesn't. I am guessing that is what you are talking about.
 
ructo said:
I see little triangle like tabs in the back. I thought the lid would cover them, but it doesn't. I am guessing that is what you are talking about.
Click to expand...

Yes, they should pop out fairly easy or I used a pocket knife, they are used for easy passage of cords/wires
 
You must log in or register to reply here.
Back
Top