• Hello!

    Either you have not registered on this site yet, or you are registered but have not logged in. In either case, you will not be able to use the full functionality of this site until you have registered, and then logged in after your registration has been approved.

    Registration is FREE, so please register so you can participate instead of remaining a lurker....

    Please be certain that the location field is correctly filled out when you register. All registrations that appear to be bogus will be rejected. Which means that if your location field does NOT match the actual location of your registration IP address, then your registration will be rejected.

    Sorry about the strictness of this requirement, but it is necessary to block spammers and scammers at the door as much as possible.

hatchling preperation

yojoe05

Rapunzels Prince Charming
Well next year it looks like I'll be set up for breeding with Rapunzel and Baskerville. I'm looking for some advice. What are the things I need to have going in and what recommendations do you have for products and such? I'm looking for an incubator recommendation and then also I'm looking at a 32 hatchling rack by boaphile plastics. Is this a good idea or would something smaller work? Then also for feeding purposes and shipping/ packaging what size of containers and such should I do that are cost effective but sturdy? Any and all recommendations are appreciated. I have looked into the details of breeding already and do have an idea of what to expect and have already set up two local pet stores as potential buyers of my common morphs to sell in their stores and I feel comfortable with how they treat their animals so I'm not worried about buyers just needing to know what all I need and brand recommendations going in to the endevor. Thanks everybody for the help.
 
Hovabator incubators work well and are cheap for small breeders. You'll need to buy incubation containers with a medium (vermiculite, perlite, etc). The boaphile rhinoraxx look nice and should work great

Sent from my SM-G900W8 using Tapatalk
 
For shipping babies, use 8oz or 16oz deli cups.

Sent from my SM-G900W8 using Tapatalk
 
The number one thing is make sure whatever rack you get is escape proof! I have five Reptile Basics Iris shoebox racks, holding 16 bins each. They told me it was escape proof. My first hatchling eve escaped! i recovered him, but it really scared me. So now I have either cardboard shims under the bins, or rubber shelf liner taped down to the shelf with foil tape. You want the bins to have friction when you slide them out. No gap.

32 is probably a good number. You have room for one or two clutches.

I buy deli cups from Superior Shipping. I like the white cups with clear lids. I use these both for feeding and for shipping.

Pro Kal (aka Twin-Pak) 8 oz White Pre- Punched 100 ct (.11 ea) T/W4-8P USD17.26 USD17.26
Pro Kal Lid (Poly Pro) aka Twinpak 4.5 " 100 ct (.08ea) T/C4-LID

These stand up to repeated openings and closings.

This is also where I buy shipping boxes. I use the 6 x 9 x 12.

It's so much easier, if you have room, to use big ramekins for water bowls. You can buy them cheap at Target They never spill. The babies have something to climb on.

I start them out on paper towels till after the first feeding, then go to CareFresh.

Start saving toilet paper tubes several months before the babies hatch. They make perfect hides when you squish them flat.

The babies go through a lot of pinks fast. One pack of 50 pinks feeds 16 babies three times- that's two weeks! I would order 100-200 reds, and add in some regular pinks if you plan on keeping the babies for any length of time. Generally babies are offered for sale after having fed, with no tricks, three consecutive times. You want to be selling babies that eat flawlessly.

I really like the mini-fridge type incubators. I've had good luck with my two. Each easily holds three clutches; four if you remove the shelf. They both heat and cool, so your eggs are safe if your AC goes out.
 
I like these little bowls I get at Petco, in the rodent department. They are nearly spill proof and double as an additional hide. They are .99 cents a piece. My baby snakes I've used them with have all liked hiding under them.

1e6be1ec28e552cf26014df9a1ca6214_zpsa3e4dc6e.jpg


f95a68475474b3908e3d6d625563477c_zps9630cf4b.jpg


69a5067b23c0cfbfda311c320756415e_zpsefba5a2b.jpg
 
I have the Animal Plastics hatchling 6qt rack (just ordered a second one today) and they have a pretty tight fit.
That said, I start my hatchling Cornsnakes in smaller bins though, because I have found they start eating sooner when in the smaller bins. I have small wooden racks from Jeff Mohr, that hold sandwich sized Take Along bins, as well as some that hold the rectangular Take Along bins made by a local guy.

I also use the same water bowls as pictured above. They are the perfect size for hatchlings, and as mentioned, double as hides. My babies love them!!
 
Back
Top