• Hello!

    Either you have not registered on this site yet, or you are registered but have not logged in. In either case, you will not be able to use the full functionality of this site until you have registered, and then logged in after your registration has been approved.

    Registration is FREE, so please register so you can participate instead of remaining a lurker....

    Please be certain that the location field is correctly filled out when you register. All registrations that appear to be bogus will be rejected. Which means that if your location field does NOT match the actual location of your registration IP address, then your registration will be rejected.

    Sorry about the strictness of this requirement, but it is necessary to block spammers and scammers at the door as much as possible.

New Owner

JamMan

James M.
Hi everyone, I purchased a corn snake almost two months ago, unfortunately from a petco. I named him Jafar (I figured it was more suiting than the alternative my friends came up with - dirka dirka Mohammad jihad) I'm pretty new to snake care and I just had some basic questions to make sure I'm doing this right.

So far though everything has been running smoothly. He's still a baby, just coming up on a foot long. I figured him growing up knowing who his boss is will be beneficial on both sides. I have fed him around seven times now, every time frozen thawed pinkies, but this most recent time a live pinkie due to the fact that it's all I could get my hands on. I've read that live pinkies can cause problems such as regurgitation or injury to the snake (explanation? Preference?). There have been no problems with feeding though. He's been pretty eager to munch. I also move him into a shoebox (I use it for temporary housing when cleaning his cage, etc.) to feed as to not associate feeding with his cage and so he doesn't consume any substrate. I've made sure not to handle him after feeding, but when are other inappropriate times to handle?

I have some pictures which I will attach, but basically I have him in a twenty gallon long tank with aspen bedding and newspaper underneath. I have a few fake plants, a little tower for climbing, a water bowl big enough for him to drink from and enter/exit as he pleases, and a hide on the warmer side of my temperature gradient (going to purchase another for him soon along with a branch).

I have changed the substrate about once a month and his water every to every other day. I have my hygrometer - which has stayed between 30% to 55% - and a digital probe thermometer which I have placed just barely underneath his substrate above the UTH, assuming that would give me an accurate reading of the heat being transferred into the bedding. It has been reading between 85 and 90 degrees Fahrenheit, but never exceeding 90 (I also need to purchase a thermostat/rheostat to regulate temp. Any suggestions?). Even though I get a reading within preferred boundaries, the substrate or surrounding areas don't feel warm to the touch.

I have compacted the substrate when setting up the cage as it is a little easier to make everything stay. Would this make burrowing difficult? I'm also curious if I should purchase a second thermometer to either keep tabs on the cooler side of my gradient or to monitor the ambient air temperature of the entire cage?

I bought two heat lamps (whatever the recommended basking bulb is and an infrared night lamp) I don't know the wattage off-hand, but I'm hesitant to use them due to how much heat is being transferred into the tank. When I touch his hide after the lamp has been used, it seems too hot and I'm worried about the snake burning himself. I understand they are not exactly necessary, I figured especially since I live in Houston and outside temperature won't get too cold for too long, but what are the signs I should look for to let me know if I should turn them on periodically?

Also, I noticed a spot on the top right side ( looking at him face to face) towards the back of his head, possibly right where his jaw ends, where there seemed to be a small scratch or something. I don't believe he is beginning to shed (what are the precursors) but how should I approach things of such?

That's pretty much where I'm at, at this point. Any input or suggestions on what I'm doing or any basic care information would be great! Also answers to my questions would really help me out. I want to make sure I've covered all the bases here. I want the little guy to be comfortable and healthy.
 
okay.. lots of info here!

first off Congrats on the friend! :)

2#, feeding live can and will injure your snake as the prey sizes increase .. so I'd suggest sticking to f/t, it will reduce the risk of transferring paracites, like pin worms and such!

as for when not to handle him besides after he's eaten for 48 hours, and when he's in blue which is when their going to shed, they don't enjoy being handled at this time.

I would definitely get your hands on a rheostat/thermostat ASAP, that way you can regulate his temps properly..

and you also want the thermometer probe to be in the glass directly above the UTH..
that way you you know what the temps are on your UTH, also compacting the substrate is fine..
I do it, it holds there tunnels even better.

and you won't feel like its hot, 85 degrees is far lower then human cow temp is..
if it feels slightly warm that's usually good enough.

I hope this helps with some of your questions, I'm sure I missed some! lol
 
you won't need the heat lamps, especially in Texas, I'd return them if you can.. and just buy a thermostat to regulate your UTH..
 
Yeah, heat lamps aren't recommended. Under tank heaters are better. Temps shouldn't be at 90, about 85 is good.

Pleeeease post pics!!!!
 
I agree with the above info!
As for the scratch, it could be from a number of things... for one, the pinky (although maybe not, because that is quite young for a mouse to even move much), a sharp hide or branch, etc. Personally I'd keep an eye on it to see how it looks. If it's bad enough there are protocols you can look up on this website to help with that and prevent infections :)

If you want a day or night light just to see your snake, you can get a very low watt bulb (ie. 13W) to see him/her. Otherwise, the bulbs aren't necessary.

DEFINITELY get a thermostat ASAP! This is the one I and many other forum users have http://www.amazon.ca/Jumpstart-Digi...TF8&qid=1382658439&sr=8-4&keywords=thermostat
And it's on sale now :) in the mean time, you can go to a big box store and grab a rheostat/lamp dimmer for like $5, which works temporarily to reduce the heat output of the UTH.

Everything else sounds pretty good though :) we'd love to see pictures! One last thing...
him "knowing whose boss"... ya, right. ;) Good luck with that! He will get to know you, in a sense, and understand that you don't want to eat him, and he can get used to you handling him. But he won't know you're "the boss" :p

And Congrats!
 
Everything else sounds pretty good though :) we'd love to see pictures! One last thing...
him "knowing whose boss"... ya, right. ;) Good luck with that! He will get to know you, in a sense, and understand that you don't want to eat him, and he can get used to you handling him. But he won't know you're "the boss" :p

And Congrats!

Yeah I know, I just meant he will hopefully be more comfortable around the consistent attention :).

Here are some pics of my snake and his cage. Any idea on what morph he might be? I was thinking diffused caramel?

2013-09-17 22.28.43.jpg

2013-09-17 22.55.21.jpg

2013-10-24 17.56.39.jpg

2013-10-24 17.56.48.jpg
 
very adorable little Guy!! :D

your set up looks good,
and
as far as morphs go, I'm still learning but he looks just like my classic or normal corn looked just like that! and he has dark belly checkers, which is another sign.

but if he is a classic he'll colour up amazingly in a year!
 
That was going to be my second guess. I tried to get online last night and match up his colors, but there are so many different types!:awcrap:
 
Very neat setup, and he looks like a "Classic" corn. The only thing I'd suggest is to bury both hides into the substrate, about halfway. They aren't "hides" when you can see them "hiding" ;)
 
Very neat setup, and he looks like a "Classic" corn. The only thing I'd suggest is to bury both hides into the substrate, about halfway. They aren't "hides" when you can see them "hiding" ;)

+1 to that, mine won't use hides if there isn't either a layer of aspen snug around the base, or if the hide isnt buried.

Also just want to say to the OP regarding the name your friends wanted to kill him instead of Jaffar - I wouldn't have published that myself. Some people may be offended by it even if you didn't say it yourself.
 
+1 to that, mine won't use hides if there isn't either a layer of aspen snug around the base, or if the hide isnt buried.

Also just want to say to the OP regarding the name your friends wanted to kill him instead of Jaffar - I wouldn't have published that myself. Some people may be offended by it even if you didn't say it yourself.

Well it's technically a quote from a movie. And If someone was offended they can speak for themselves. Get off your high horse bud.
 
Well it's technically a quote from a movie. And If someone was offended they can speak for themselves. Get off your high horse bud.

I guess it being from a movie makes it ok..? I was offended but decided to respond to you in what I thought was a polite, friendly way instead of being defensive and rude. :nope:
 
Please, no mini-modding. If we prohibit everything that might be offensive to others, nothing will ever be allowed to be posted on this forum.
 
Cute lil scalebaby! He looks alot like he will turn out like my boy Shorty, except he has a normal tail. :)
You are going to love how his colors turn out!
 
Back
Top